HELP! Fans not working on my Nanocube 24DX

[Coralreefdiver]

Perhaps some of you have seen, I JUST posted pics last night of my tank, and said all has been going well...until NOW.

The cooling fans have stopped working. Normally they run constantly on the tank anytime the lights are running, except for when the LED moonlights are on at night.

NOW....nothing, no fan, and the heats starting to build.

Anyone have any problems with theirs? Any troubleshooting ideas?

:cryinga: :cryinga: :cryinga: :cryinga: :cryinga:

 

[sadielynn]

check the wires for loose wires if that is not the case you may need to replace them if that does not work you could try a room fan over top it for now to help ... Dj, Dragon , and Mike , Skip are the experts on the cubes here :mrgreen:

 

[skipm]

I have heard of occasional fan problems before. Contact either JBJ or where ou bought the cube and see if they will do anything. If not take an electrical tester (set for DC power) and see if there is any power coming into the fans, if there is you could buy a set of the ball bearing fans the Steven (Dragon79) recommended. If there is no power check the incoming wiring to see if you have a short. If all else fails you can cut the wires coming into the fans (tape or cap them off to be safe) and wire the fans to a small powersupply that plugs directly into the wall and use a timer to control the fans.