need some help

[fastwhiteegg]

ok iam setting up a new tank and i have all the holes drilled with 1"inch bulk heads. i cant seem to find a 1"inch locline that will screw into the bulk head. that is were i need everyones help. can someone please help me out on this iam really wanting to get this new tank up and running thanks

 

[TimSchmidt]

I think loc-line only comes in 1/4", 1/2", 3/4", and 2.5" sizes. Might have to go with a reducer to use 3/4" loc-line products.

 

[reefman23]

get a pvc reducer with a 1"male end and a 3/4" female end. Then you screw the 1" end into the bulkhead, and the 3/4" loc-line into the others.

That should work.

Jesse

 

[Anonymous]

This is a different product, but is pretty much as flexible as LocLine and comes in the size that will fit your bulkheads. If you need a longer run, then use a adapter from the bulkhead plus a length of pvc pipe and then install the nozzle on the end.

http://www.oceansmotions.com/store/...id=41&osCsid=b1998c3caa9c409bfb904e615d4d3c20

 

[reefman23]

Gary, Ive seen those before.. they are way cool.

Jesse

 

[Anonymous]

Gary, Ive seen those before.. they are way cool.

Jesse

Yeah, I have a couple of them. They are very adjustable and I think will work as well as LocLine, if you don't need a long, flexible run.