ronald7410
New Member
Does anyone have a Deep Sand Bed in their Nano6gal? How do I set one up using the existing chambers?
Nano6 DSB
- Thread starter ronald7410
- Start date
I cant imagine setting up a DSB in a 6g tank, especially in the rear chambers. A DSB is usually 6" or more deep and that just isn't possible in a 6g tank. Even if you did it somehow, the small size of the DSB wouldn't even be beneficial. They are more suited for larger tanks with larger surface area.
HTH,
Jesse
HTH,
Jesse
TimSchmidt
New Member
You could try a remote DSB. Basically plumb a sump (a gallon bucket could work) and then fill with sand.
ronald7410
New Member
Wheres the link for the remote DSB? hahareefman23 said:
TimSchmidt
New Member
A remote dense sand be is honestly any container holding sand about 6 inches or so deep and has water run through it...
You can take a 1 gallon bucket and fill it with sand and have it gravity feed back into your sump (use a small pump to get the water up and in the bucket).
You can take a 1 gallon bucket and fill it with sand and have it gravity feed back into your sump (use a small pump to get the water up and in the bucket).