current 1/15 hp chiller need help setting up

K

kidrobot

New Member
hi i just purchased a current chiller 1/15hp from drsfostersmith.com for my nanocube 24g....right now i changed the stock pump with maxijet 1200....and i might put live rubble in the middle chamber and the regular jbj stand. what pump do i need and tubing to set this up...do i have to drill holes on the canopy? thanks....
 
T

Trogdor

New Member
Patience my friend. Your posts were less than an hour apart and during the middle of the night for some of us. I don't know much about the nanocubes so I can't help you on the middle chamber mods. If you look back on Drs Foster & Smith website, it states that it has 1/2" in and 5/8" out. So you will need those sizes running to and from your tank. I don't know what your setup looks like without a photo so I can't tell you if you will need to drill or not. I would assume that if it is an enclosed top and can't get a Ø1/2" or a Ø5/8" tube through the canopy then it will probably need to be drilled.
 
You must log in or register to reply here.
Top